Pneumatically Driven V-CUT PCB Separator 40mm Height Pneumatic PCB
Depanelizer
Introduction:
1. Pneumatically driven and electric control , sample design. There
have sensor device in the machine ,cuttting board one time with
lowest cut stresses.HS-310 apply for separate precise SMD PCBA or
thin plates.
2. The straight knife type separator machines were designed to
separate pre-scored panel boards carefully, without bending or
tension stress. Even sensitive SMD-components like ceramic
capacitors will not be damaged by the separate process,improve
products quality .
3. Due to the special design of the blade ,boards with high
components placed close to the edges can be separated safely. Based
on a proven method of separating, wedge-shaped knives are used to
cut the panels within the groove. This enables boards of less than
1 mm thickness to be separated safely and without cutting stress.
Features:
1. Cutting force stress under 500, No vibration and noise during
cutting process to prevent precise components damage.
2.Pneumatic driver ,solenoid vale controlled , high speed.
3.The up and lower blade height are adjustable , Gap for insertion
of the PCB board can easily be adjusted by adjusting knob in the
top side of the machine.
4.Lower blade height adjust front and real portion can be adjusted
separately, don't need shim , which make change and adjust blade
more easy . The blade can sharpening many times, lower cost .
5.The PCB or thin plate without v-grooved can customized tray and
prevent stay positioning device.
6.Operation and maintenance can be done also by unskilled personnel
.
Specification:
| Product name | PCB depanelizer |
| Model | HS-310L |
| Part-up height | Max 40mm |
| Part-down height | Max 20mm |
| Air supply | 5Kgf/cm |
| Output | 12.5tons(gross) |
| Efficient cutting length | 1-360mm |
| Linear blade size | 360*43.5*6mm |
| PCB thickness | 0.1mm~2.0mm(With v grove)
0.1mm ~1.0mm(Without V grove ) |
| Blade material | Import high quality high speed steel tool |
| Separating speed | 1-300mm/s |
| V-cut thickness | 0.3-3.5mm |
| Air consumption | 200-400(L/min) |
| Machine size | 700*325*400mm |
| Weight | 130kg |
| Suitable board | All V-cut boards |
Application boards:
