Time Control Automatic Solder Paste Thawing Machine With Multiple
Tanks
Introduce
The solder paste needs to be tempered before use. Usually the
tempering time is about 4 hours. The purpose is to restore the
activity of the refrigerated solder paste and make it easier to
use. Our solder paste rewarming machine is an intelligent
management device that integrates the functions of refrigerated
storage, rewarming, stirring, traceability and direction
traceability of solder paste. The refrigeration temperature can be
controlled within the range of 1-10 degrees Celsius, and the
temperature can be controlled through numbers and temperature.
Curve monitoring and recording, first in, first out, to meet the
storage and use requirements of different solder pastes.
Specification
| Machine name | Fully automatic solder paste reheating machine | product brand |
| Operating mode | voltage mode | Product net weight: 16kg |
| Operating Voltage | AC220V 60HZ | Product material: steel plate spray paint |
| Product Size | Four slots L670*W220*H335mm Tank size: length 150*depth 100*height 110mm |
| Ability to work | The solder paste and red glue reheating machine/defrosting machine
can be used with solder paste in the slot and needle-type red glue
(all small red glue with a total length of less than 120MM can be
used), and the solder paste and red glue can be switched
intelligently. New and old customers can choose from
4/5/6/8/10/12/14 workstations to 30 workstations. Non-standard can
be customized. Supports 250G/500G solder paste, total length less
than 120MM needle tube red glue. |
Features
1. Using PLC control, imported electrical components are assembled
and produced.
2. Each can of solder paste placement slot has independent time
control. After setting the time, the solder paste can will be
automatically fixed by the cylinder, and the solder paste will
automatically release the can after the solder paste has returned
to temperature.
3. Solder paste cans of different specifications and models can be
used on the same equipment.
4. Cans of 4/6/8/10/12/14/16-30 can be reheated at the same time,
each can is 500g of solder paste. If more cans are reheated, they
can be customized according to customer requirements.
5. Each bottle is equipped with a cylinder to fix the solder paste
bottle. The solder paste bottle cannot be taken out before the time
is up.
The solder paste application and requirement
When the solder paste taken out of the refrigerator before using,
the temperature of the solder paste will be much lower than the
room temperature. If open the solder paste bottle without thawing,
it’s very easy to condense the moisture in the air and adhere to
the solder paste. Also if use the solder paste without thawing,
after printing, on the reflow soldering process(temperature over
200℃), the water on the solder paste is rapidly vaporized due to
strong heat, will lead to the solder paste explosive, then will
damage the solder tin and components. So for better printing and
soldering performance. The solder paste must thaw before using.
The advantages of the solder paste machine
A, The natural temperature thawing can keep the activity of the
flux, which the mixing thawing can not solve the problem.
B, Use the solder paste thawing machine can control the solder
paste to the room temperature,which will help control the
production, improve the efficiency.
C, Use this machine means control the first process of the SMT
production, this is the first step to produce a good quality
product.
