Fully Automatic SMT Solder Paste Mixer Multi-Functional Solder
Paste Machine For PCB Assembly Line
Automatic Solder Paste Mixer:
Solder Paste Reheating Machine is a device used to temper and
restore solder paste viscosity. It is commonly used in the
electronics manufacturing industry in surface mount (SMT) processes
to restore the fluidity and viscosity of solder paste to ensure
soldering quality and reliability.
The following are some features and working principles of solder
paste reheating machines:
Temperature control: The solder paste reheating machine has a
precise temperature control system that can increase the
temperature of the solder paste by heating it, usually between 60°C
and 150°C. Accuracy of temperature control is critical to restoring
solder paste viscosity and fluidity.
Uniform temperature distribution: Solder paste reheating machines
usually use special heating elements and temperature sensors to
ensure that the temperature is evenly distributed throughout the
recuperation chamber and avoid the impact of temperature gradients
on solder paste performance.
Control time and speed: The reheating machine can adjust the
reheating time and speed as needed to adapt to different types and
specifications of solder paste. A higher temperature recovery speed
can shorten the production cycle, but it is necessary to ensure
that the solder paste is fully recovered.
Cooling function: Some solder paste reheating machines also have a
cooling function, which can quickly cool the solder paste after
reheating to solidify the solder joints and improve production
efficiency.
Automated control: Solder paste reheating machines usually have
automated control functions that can preset temperature and time
parameters, and monitor and adjust temperature changes during the
reheating process.
smt solder paste mixer Advantage:
Unique contoured shape, generous appearance and practical, which is
made by advanced coating process workmanship.
Mixing principle is on the basis of Motor rotation and revolution
mode of agitation, no need to defrost the paste. Need to recovery the paste in short time, then the solder can be used after
stirring well and deforming.
Okay for all brands of 500g paste, mixing with 2 cans in one time,
which can save time and efficient.
Paste box no need to be opened during stirring to avoid oxidation
and water vapor absorption.
Closed stirring can fix running time, make sure stability of paste
softness, and by stirring old and new paste can make new active
paste.
Enjoy the high degree of automation, stable performance, easy to
operate, high safety factor, and simple in maintenance.
Applies to Omron time relay controller, reliable and easy to
operate.
Feature of smt solder paste mixer
1.put the machine on a solid work surface and the connect power.
Turn on swith after stabling the machine
2.Open the cover, and put two same weight bottle of solder past or
ink into the barrel fixture.
3. Work time setting : the time can be set from 0.1-9.9 min through
press the red button on the panel. Generally, it set at 3
minutes or so . If the solder paste is froze to low and stored for
too long, the stir time should be increase to appropriate.
4. Press the start switch, the machine starts running when the set
time is reached, the machine will automatically stop and
whistle. If there is abnormal noise during operation, you should
immediately press stop switch to check. (Note: do not open the
cover before the machine stopping moving to avoid danger
Features
1, The solder cream jars are placed in 45 angle, and run around its
axis line, so the solder cream will not ahere to the jar cover.
2. Compatible with most brand 500g solder paster,can mixing two tins
at one time, save time and improve efficiency.
3. Double security design to asure the safety of operators.
4. The air bubbles can be eliminated while the solder paste is being
mixed.
5, The contorl of the solder paste mixing is considered fully with
using special control circuit.
6, The rotating speed has proved by practice, so the impact against
the tin power and the effect to solder paste quality in the rising
temperature are avioded.
7. Without water, does not destroy the shape of tin.
Specification
| Model: | NSTAR-600 |
| Wattage: | 60W |
| Power: | AC220V, 50Hz |
| Roating speed: | Primary rotating:1400RPM;Sencond rotating:400RPM |
| Working Capacity: | 500g*2jar; |
| Tin Pot's Size: | M diameterΦ60-Φ67standard one
S diameterΦ53-Φ60(for choose, please contact us )
L diameterΦ67-Φ74(for choose, please contact us) |
| Time Setting: | 0.1～9.9mins, adjust0.1min per time;
10～30mins, adjust1.0min per time |
| Display & Caution: | LED digital display,light blink and buzzer warning |
| Machine Demension: | 410*410*490mm(W*D*H) |
| Packing Demension: | 420*420*500mm(W*D*H) |
| Net/Gross Weight: | 40KG/45KG |
Item | Solder Paste Mixer |
Package | 1 set into one wooden carton as safety condition |
External Dimension | customizable |
Weight | about 40-45kgs |
Delivery | about 15-20 working days |
Payment | D/P, T/T, Western Union, MoneyGram |
Port | Shenzhen |
| A.By Courier: 4-7 Working days by special offer |
B.By Air: 7 Working days at appointed airport |
C.By Sea: 20-25 Working days at appointed port |
